However, if you’re looking to keep costs to a minimum and already have a high-end set of universal monitors we can build custom AFS-1 Sleeves that sit over the flange of your universal monitors.  We do not glue or permanently attach the custom earmolds to your monitors, but rather make the earmolds to attach to the flange of the monitors via a pressure fit that is removable.  Our Sleeves will provide custom comfort and retention so your monitors won’t fall out of your ears, and will even enhance the sound quality by providing isolation and a proper fit that reaches further down the ear canals.

We have countless templates in our lab for most of the major brands of universal monitors on the market, so most likely you will not have to go without your monitors while we manufacture your Sleeves.  If we do not have the template on file, you may need to send them to our lab with your ear impressions.  Please call or email us with the make and model number of your monitors and we can let you know right away if we have them on file.  Although some earmold manufactures believe so, there is no such thing as one universal template that fits all monitors.  If you want the earmold Sleeves to be manufactured correctly and fit securely on your monitors, the pressure fit area on the earmolds must be designed to fit your monitors specifically.

Please note that we do not recommend the Sleeves for use under helmets for motorcycle riding.  Universal fit in-ear monitors typically already stick out of the ears, and adding a custom earmold may extend them a bit further out; therefore, they will not fit comfortably under a helmet, and will move or fall out when you pull your helmet on and off.

The post Do you offer a remold service for universal monitors I purchased elsewhere? appeared first on HearSmart Solutions Inc..

• Never allow moisture to get into the drivers. Simply put, electronics and moisture do not mesh.  It is imperative that you keep your Earphones/Monitors as dry as possible, and use the desiccant provided every time they have been exposed to moisture or humidity.  Please see instructions on proper use of the Desiccant Disk.  The benefit of wearing custom earmolds that fit further down the ear canal is that you won’t be sweating in the portion of the canal where the opening to the earpiece sits; however, be mindful that when you’re pulling the earpieces out and re-inserting them, you could potentially allow moisture to get into the sound bore/vent.  If you are sweating, and you must re-insert them after removing, make sure you quickly dry the area around the ear canal first.

If you sweat a great deal, it may be worth purchasing a larger quantity of silica gel desiccant to allow for more effective moisture removal.  Silica gel is easily purchased from most major online retailers.  Alternatively, many of our Providers (most hearing clinics) also sell different types of dehumidifiers.

• Never pull on the cable/wire to remove your Earphones/Monitors.  Although the construction of our permanent wires and detachable cable connectors are made robust and secure, improper removal causes extra strain on the internal components, connections, and the copper wiring underneath the rubber sheathing in the wire.  Custom earmolds that are inserted correctly should essentially be “locked” into the ear.  Pulling on the cable/wires to remove them means you’re not twisting the earmolds out correctly.   The top helix portion of the earmold should be popped out of the top pocket of the ear first, and then the full earmold should be twisted forward, towards your nose, to remove (see proper removal).
• Never squish or bend the earmolds. Although the earmolds are flexible and provide a durable shelter for the inner components, squishing and bending the earmolds can snap or break the wiring or connections on the inside.  Always handle your Earphones/Monitors with care, as you would with any electronic.
• Keep them clean (see proper cleaning recommendations).  If the sound bore/vent becomes clogged with wax or debris, the sound will be blocked from coming out.  This is a temporary problem that can easily be remedied by removing the debris; however, if the wax/debris gets down the sound bore/vent far enough and gets inside the driver, it will damage the driver permanently and will not be able to be repaired.
• Always store them in the case provided, or a protective container, and keep them out of sunlight and heat.  The UV rays can cause the earmolds to oxidize and yellow in colour, and extreme heat can damage the components.  Keeping the outer layer of the earmolds clean will also help to reduce the silicone oxidization.
• Ensure you’re safely tucking the wires into place and away from the edge of the case before closing. The copper wiring underneath the rubber sheathing of the wire can break if clamped along the edge of the Deluxe Monitor Case, or if zipped in the Earphone Case.

The post How can I extend the life of my Earphones/Monitors? appeared first on HearSmart Solutions Inc..

The post Can I upgrade the permanent wire on my Earphones after manufacturing? appeared first on HearSmart Solutions Inc..

The post Can I purchase a single-sided Earphone/Monitor? appeared first on HearSmart Solutions Inc..

We do have some samples of universal earphones that can be listened to as a comparison; however, the sound signature may vary slightly due to them not being a custom-fit.

The post Can I listen to the monitors or earphones so I can decide which ones to buy? appeared first on HearSmart Solutions Inc..

The difference is in the sound signature and frequency response you hear.    When you add extra drivers, you receive additional bass, and change the sound signature and frequency response.  Our multi-driver systems feature integrated crossover circuits that split the sound signal into multiple frequency bands to change the frequency emphasis.  This ultimately creates our signature sound performance.

The Single drivers have a single speaker in each earmold that produces all frequencies from that one component: highs, mids, and lows.  This delivers a high clarity neutral response.  The Dual Drivers have two speakers in each earmold; one is a dedicated bass speaker, and the other is a mid-high; therefore, you receive significantly more bass than the Single Drivers.  The Triple Drivers have three speakers in each earmold comprising of a single low frequency bass speaker and a dual mid-high speaker.  The crossover design in the Triples, and the extra mid-high speaker, allow for a wider frequency response that creates more low frequency headroom and expansion into the highs compared to the duals.  Overall, the configuration of the Triples provides perfectly balanced depth with a rich and vibrant sound signature that emphasizes all of the distinctions and nuances of your favorite music or performance.

The post How do I choose between Single Drivers, Duals, or Triples? appeared first on HearSmart Solutions Inc..

The post What are balanced armature drivers? appeared first on HearSmart Solutions Inc..

AFE Audiofuse^TM Earphones:  Our custom Earphones are designed specifically for recreational purposes such as motorsports, exercising, listening to music on flights, and audiophiles.  We intentionally have the wire exiting the bottom of the earmolds to allow helmets to be pulled on and off without kinking or bending the wire.  This permanently attached bottom-exit wire design allows for a little more durability for active lifestyles and enables us to use the least amount of space possible; i.e.: the earmolds are made as flush as possible to the ear so they are not sticking out.  This is particularly important for those wearing full-face helmets or safety gear.

All of our AFE AudioFuse™ Earphones are made in a flexible silicone for maximum comfort.  You can choose between the Standard Braided Cable (no controls), or upgrade to the In-Line Mic Cable or Bluetooth Cable if you require track controls, volume control, and voice prompts, or hands-free phone calls.

AFM Audiofuse^TM in-Ear-Monitors:  Our flagship AFM series of In-Ear Monitors are designed for stage performers and recording musicians, DJ’s and radio hosts, audio engineers, TV & music production, and audiophiles.  We utilize top of the line cables, connectors and electronic components to create a superior audio experience. Stage performers wear IEM’s attached to a receiver to enable them to hear a high fidelity custom mix of their own instrument, vocals, and the other musician’s, while receiving hearing protection.

The cable is detachable, so it can be replaced, or switched with another colour, or upgrade cable.  Because the cable sits over the ears to remain discreet for performances, the earmolds are built out of the ears to attach the cable to the front of the earmolds; therefore, Monitors are not recommended for motorcyclists as they are typically too bulky to fit under a tight helmet comfortably.  We manufacture our In-Ear-Monitors in either the same soft, flexible silicone as the Earphones, or in a durable acrylic.  Each have their benefits, but it usually comes down to personal preference for which material is chosen.

So, there you have it; the main difference is in the wire and where it exits the earmolds.  The earphones have a permanent bottom-exit cable, whereas the Monitors have a detachable over-the-ear style cable.  We use the same premium proprietary balanced armature drivers in both Audiofuse™ lines, including integrated crossover circuits on multi-driver systems; therefore, you can make your purchase based solely on what you’re using them for, and you won’t have to compromise the quality of sound.

The post What is the difference between the Earphones and Monitors? appeared first on HearSmart Solutions Inc..